MagiCube PowerCube 10HC – 47.2 kWp / 100.35 kWh Microgrid
Price on Request
Packaging Capacity
Incoterm
Model No.
Compact Solar-Plus-Storage Microgrid
System Overview
A compact, transportable microgrid integrating a foldable 47.2 kWp photovoltaic array, 100.35 kWh LFP storage and a 50 kW three-phase hybrid inverter.
Key Features
- Integrated PV, LFP battery and inverter
- Grid-independent three-phase output
- Mobile and scalable architecture
- IP65 inverter protection
- C4 or C5-M container coating
Typical Applications
- Remote communities
- Construction and mining camps
- Islands and coastal sites
- Emergency power
- Off-grid water treatment
Technical Specifications
| Maximum Slope Tolerance | 1% |
|---|---|
| Installation Orientation | Any azimuth |
| Deployment Angle | 15° (project-adjustable) |
| Structure Material | Hot-dip galvanized steel square tube |
| Coating Grade | C4 or C5-M |
| Solar Array Capacity | 47.2 kWp |
| PV Modules | 80 × 590 W TOPCon modules |
| Battery Chemistry | LFP, 280 Ah cells |
| Rated Battery Energy | 100.35 kWh |
| Battery Voltage Range | 280–403 V |
| Inverter Rated Power | 50 kW |
| Output Phase | Three-phase (3L + N + PE) |
| Inverter Protection | IP65 |
| Unfolded Footprint | 54 × 4.8 × 2.9 m |
| Folded Dimensions | 3 × 2.4 × 2.9 m |
| Total Weight | 8 t |
| Full Unfolding / Folding Time | 120 / 60 minutes |
| Required Crew | 3 persons |
Packaging & Project Engineering
| Packaging Capacity | 2 systems shipped as one 20HC configuration |
|---|---|
| Commercial Status | Price on Request |
| Configuration | Project-specific electrical, mechanical and environmental options are available |
Published performance data is based on the manufacturer datasheet. Final design, output, utilities, compliance scope and site interfaces must be confirmed during project engineering.
Download Center
FAQ
The standard scope can integrate the photovoltaic array, deployment structure and project-specific electrical equipment. PowerCube configurations additionally integrate LFP storage and a three-phase hybrid inverter.
Yes. Module type, voltage architecture, inverter rating, battery capacity, coating grade and auxiliary power interfaces can be adapted to the project requirements.
Please provide the installation location, load profile, solar resource, terrain and slope, grid or generator interface, wind and corrosion conditions, transport constraints and applicable standards.
Systems are factory-integrated to reduce field work. Delivery, deployment supervision, commissioning, training and remote technical support can be included according to the project scope.
